Timezone setup:
Backlog0 Timezone 99; TimeStd 0,0,10,1,4,120; TimeDst 0,0,3,1,3,180
PulseTime setup:
Ex: PulseTime1 30
PulseTime Display the amount of PulseTime remaining on the corresponding Relay(x = 1..32)
Set the duration to keep Relay ON when Power ON command is issued. After this amount of time, the power will be turned OFF.
0 / OFF = disable use of PulseTime for Relay
1..111 = set PulseTime for Relay in 0.1 second increments
112..64900 = set PulseTime for Relay, offset by 100, in 1 second increments. Add 100 to desired interval in seconds, e.g., PulseTime 113 = 13 seconds and PulseTime 460 = 6 minutes (i.e., 360 seconds)